Currently, when a new scheduled task is added and its scheduled time has
already passed, we set it to ACTIVE. This is problematic, because it
means it will jump the queue ahead of all other SCHEDULED tasks;
furthermore, if the Synapse process gets restarted, it will jump ahead
of any ACTIVE tasks which have been started but are taking a while to
run.
Instead, we leave it set to SCHEDULED, but kick off a call to
`_launch_scheduled_tasks`, which will decide if we actually have
capacity to start a new task, and start the newly-added task if so.
For context of why we delay read receipts, see
https://github.com/matrix-org/synapse/issues/4730.
Element Web often sends read receipts in quick succession, if it reloads
the timeline it'll send one for the last message in the old timeline and
again for the last message in the new timeline. This caused remote users
to see a read receipt for older messages come through quickly, but then
the second read receipt taking a while to arrive for the most recent
message.
There are two things going on in this PR:
1. There was a mismatch between seconds and milliseconds, and so we
ended up delaying for far longer than intended.
2. Changing the logic to reuse the `DestinationWakeupQueue` (used for
presence)
The changes in logic are:
- Treat the first receipt and subsequent receipts in a room in the same
way
- Whitelist certain classes of receipts to never delay being sent, i.e.
receipts in small rooms, receipts for events that were sent within the
last 60s, and sending receipts to the event sender's server.
- The maximum delay a receipt can have before being sent to a server is
30s, and we'll send out receipts to remotes at least at 50Hz (by
default)
The upshot is that this should make receipts feel more snappy over
federation.
This new logic should send roughly between 10%–20% of transactions
immediately on matrix.org.
To work around the fact that,
pre-https://github.com/element-hq/synapse/pull/17903, our database may
have old one-time-keys that the clients have long thrown away the
private keys for, we want to delete OTKs that look like they came from
libolm.
To spread the load a bit, without holding up other background database
updates, we use a scheduled task to do the work.
There was a bug that meant we would return the full state of the room on
incremental syncs when using lazy loaded members and there were no
entries in the timeline.
This was due to trying to use `state_filter or state_filter.all()` as a
short hand for handling `None` case, however `state_filter` implements
`__bool__` so if the state filter was empty it would be set to full.
c.f. MSC4222 and #17888
The latest Twisted release changed how they implemented `__await__` on
deferreds, which broke the machinery we used to test cancellation.
This PR changes things a bit to instead patch the `__await__` method,
which is a stable API. This mostly doesn't change the core logic, except
for fixing two bugs:
- We previously did not intercept all await points
- After cancellation we now need to not only unblock currently blocked
await points, but also make sure we don't block any future await points.
c.f. https://github.com/twisted/twisted/pull/12226
---------
Co-authored-by: Devon Hudson <devon.dmytro@gmail.com>
Currently, one-time-keys are issued in a somewhat random order. (In
practice, they are issued according to the lexicographical order of
their key IDs.) That can lead to a situation where a client gives up
hope of a given OTK ever being used, whilst it is still on the server.
Related: https://github.com/element-hq/element-meta/issues/2356
When entries insert in the end of timer queue, then unnecessary entry
inserted (with duplicated key).
This can lead to some timeouts expired early and consume memory.
Basically, if the client sets a special query param on `/sync` v2
instead of responding with `state` at the *start* of the timeline, we
instead respond with `state_after` at the *end* of the timeline.
We do this by using the `current_state_delta_stream` table, which is
actually reliable, rather than messing around with "state at" points on
the timeline.
c.f. MSC4222
The main change here is to add a helper function
`gather_optional_coroutines`, which works in a similar way as
`yieldable_gather_results` but takes a set of coroutines rather than a
function
Fixes#17823
While we're at it, makes a change where the redactions are sent as the
admin if the user is not a member of the server (otherwise these fail
with a "User must be our own" message).
Reset `sliding_sync_membership_snapshots` -> `forgotten` status when
membership changes (like rejoining a room).
Fix https://github.com/element-hq/synapse/issues/17781
### What was the problem before?
Previously, if someone used `/forget` on one of their rooms, it would
update `sliding_sync_membership_snapshots` as expected but when someone
rejoined the room (or had any membership change), the upsert didn't
overwrite and reset the `forgotten` status so it remained `forgotten`
and invisible down the Sliding Sync endpoint.
Bumps [mypy](https://github.com/python/mypy) from 1.10.1 to 1.11.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/python/mypy/blob/master/CHANGELOG.md">mypy's
changelog</a>.</em></p>
<blockquote>
<h3>Mypy 1.11.2</h3>
<ul>
<li>Alternative fix for a union-like literal string (Ivan Levkivskyi, PR
<a
href="https://redirect.github.com/python/mypy/pull/17639">17639</a>)</li>
<li>Unwrap <code>TypedDict</code> item types before storing (Ivan
Levkivskyi, PR <a
href="https://redirect.github.com/python/mypy/pull/17640">17640</a>)</li>
</ul>
<h3>Acknowledgements</h3>
<p>Thanks to all mypy contributors who contributed to this release:</p>
<ul>
<li>Alex Waygood</li>
<li>Alexander Leopold Shon</li>
<li>Ali Hamdan</li>
<li>Anders Kaseorg</li>
<li>Ben Brown</li>
<li>Bénédikt Tran</li>
<li>bzoracler</li>
<li>Christoph Tyralla</li>
<li>Christopher Barber</li>
<li>dexterkennedy</li>
<li>gilesgc</li>
<li>GiorgosPapoutsakis</li>
<li>Ivan Levkivskyi</li>
<li>Jelle Zijlstra</li>
<li>Jukka Lehtosalo</li>
<li>Marc Mueller</li>
<li>Matthieu Devlin</li>
<li>Michael R. Crusoe</li>
<li>Nikita Sobolev</li>
<li>Seo Sanghyeon</li>
<li>Shantanu</li>
<li>sobolevn</li>
<li>Steven Troxler</li>
<li>Tadeu Manoel</li>
<li>Tamir Duberstein</li>
<li>Tushar Sadhwani</li>
<li>urnest</li>
<li>Valentin Stanciu</li>
</ul>
<p>I’d also like to thank my employer, Dropbox, for supporting mypy
development.</p>
<h2>Mypy 1.10</h2>
<p>We’ve just uploaded mypy 1.10 to the Python Package Index (<a
href="https://pypi.org/project/mypy/">PyPI</a>). Mypy is a static type
checker for Python. This release includes new features, performance
improvements and bug fixes. You can install it as follows:</p>
<pre><code>python3 -m pip install -U mypy
</code></pre>
<p>You can read the full documentation for this release on <a
href="http://mypy.readthedocs.io">Read the Docs</a>.</p>
<h3>Support TypeIs (PEP 742)</h3>
<p>Mypy now supports <code>TypeIs</code> (<a
href="https://peps.python.org/pep-0742/">PEP 742</a>), which allows</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="789f02c83a"><code>789f02c</code></a>
Bump version to 1.11.2</li>
<li><a
href="917cc75fd6"><code>917cc75</code></a>
An alternative fix for a union-like literal string (<a
href="https://redirect.github.com/python/mypy/issues/17639">#17639</a>)</li>
<li><a
href="7d805b364e"><code>7d805b3</code></a>
Unwrap TypedDict item types before storing (<a
href="https://redirect.github.com/python/mypy/issues/17640">#17640</a>)</li>
<li><a
href="32675dddfa"><code>32675dd</code></a>
Revert "Fix Literal strings containing pipe characters" (<a
href="https://redirect.github.com/python/mypy/issues/17638">#17638</a>)</li>
<li><a
href="778542b93a"><code>778542b</code></a>
Revert "Fix <code>RawExpressionType.accept</code> crash with
<code>--cache-fine-grained</code>" (<a
href="https://redirect.github.com/python/mypy/issues/1">#1</a>...</li>
<li><a
href="14ab742dec"><code>14ab742</code></a>
Bump version to 1.11.2+dev</li>
<li><a
href="570b90a7a3"><code>570b90a</code></a>
Bump version to 1.11</li>
<li><a
href="b3a102ef31"><code>b3a102e</code></a>
Fix <code>RawExpressionType.accept</code> crash with
<code>--cache-fine-grained</code> (<a
href="https://redirect.github.com/python/mypy/issues/17588">#17588</a>)</li>
<li><a
href="aec04c7448"><code>aec04c7</code></a>
Fix PEP 604 isinstance caching (<a
href="https://redirect.github.com/python/mypy/issues/17563">#17563</a>)</li>
<li><a
href="cb44e4d8f1"><code>cb44e4d</code></a>
Fix <code>typing.TypeAliasType</code> being undefined on python <
3.12 (<a
href="https://redirect.github.com/python/mypy/issues/17558">#17558</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/python/mypy/compare/v1.10.1...v1.11.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Spawning from @kegsay [pointing
out](https://matrix.to/#/!cnVVNLKqgUzNTOFQkz:matrix.org/$ExOO7J8uPUQSyH-9Uxc_QCa8jlXX9uK4VRtkSC0EI3o?via=element.io&via=matrix.org&via=jki.re)
that the Sliding Sync endpoint doesn't handle a large room with a lot of
state well on initial sync (requesting all state via `required_state: [
["*","*"] ]`) (it just takes forever).
After investigating further, the slow part is just
`get_events_as_list(...)` fetching all of the current state ID's out for
the room (which can be 100k+ events for rooms with a lot of membership).
This is just a slow thing in Synapse in general and the same thing
happens in Sync v2 or the `/state` endpoint.
---
The only idea I had to improve things was to use `batch_iter` to only
try fetching a fixed amount at a time instead of working with large
maps, lists, and sets. This doesn't seem to have much effect though.
There is already a `batch_iter(event_ids, 200)` in
`_fetch_event_rows(...)` for when we actually have to touch the database
and that's inside a queue to deduplicate work.
I did notice one slight optimization to use `get_events_as_list(...)`
directly instead of `get_events(...)`. `get_events(...)` just turns the
result from `get_events_as_list(...)` into a dict and since we're just
iterating over the events, we don't need the dict/map.
Fixes https://github.com/element-hq/synapse/issues/17698
This handles `required_state` changes by checking if new state has been
added to the config, and if so fetching and returning that from the
current state.
This also takes care to ensure that given a state entry S that is added,
removed and then re-added that we do *not* send S down a second time if
there have been no changes to S in the current state. This is fine for
Rust SDK (as it just remembers all state), but we might decide not to do
this behaviour in the MSC. If we decide to always send down S then its
easy enough to rip out all the code.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
- better validation on user input
- fix an early task completion
- when checking membership in rooms, check for rooms user has been
banned from as well
Adds the option to load the Redis password from a file, instead of
giving it in the config directly. The code is similar to how it’s done
for `registration_shared_secret_path`. I changed the example in the
documentation to represent the best practice regarding the handling of
secrets.
Reading secrets from files has the security advantage of separating the
secrets from the config. It also simplifies secrets management in
Kubernetes.
There is a bug with the `StreamChangeCache` where it would incorrectly
return that all entities had changed if asked for entities changed
*since* the earliest stream position.
Note that for streams we use the inequalities: `$min_stream_id <
stream_id <= $max_stream_id`, i.e. when we ask the stream change cache
for all things that have changed since `$stream_id` we don't care for
events that happened *at* `$stream_id`.
Specifically: `_earliest_known_stream_pos` is the position at which we
know that we'll have entries for all changes since that point, we can
use the cache for any stream IDs that equal
`_earliest_known_stream_pos`.
`_earliest_known_stream_pos` is set in three places:
- On startup we set it either to:
- the current maximum stream ID, with not prefilled values; or
- the minimum of the latest N values we pulled from the DB
- When we evict items from the bottom, we set it to the stream ID of the
evicted items.
This was changed in https://github.com/matrix-org/synapse/pull/14435,
but I think we were overly conservative there.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
The notifier is quite inefficient when it has to wake up many user
streams all at once
From a silly benchmark this takes the time to notify 1M user streams
from ~30s to ~5s
This is basically exactly the same logic as for receipts. Essentially we
just need to track which room account data we have and haven't sent down
to clients, and use that when we pull stuff out.
I think this just needs a couple of extra tests written
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Performance optimization: We can avoid fetching rooms that the user has
left themselves (which could be a significant amount), then only add
back rooms that the user has `newly_left` (left in the token range of an
incremental sync). It's a lot faster to fetch less rooms than fetch them
all and throw them away in most cases. Since the user only leaves a room
(or is state reset out) once in a blue moon, we can avoid a lot of work.
Based on @erikjohnston's branch, erikj/ss_perf
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
Add cache to `get_tags_for_room(...)`
This helps Sliding Sync because `get_tags_for_room(...)` is going to be
used in https://github.com/element-hq/synapse/pull/17695
Essentially, we're just trying to match `get_account_data_for_room(...)`
which already has a tree cache.
No need to sort if the range is large enough to cover all of the rooms
in the list. Previously, we would only do this optimization if the range
was exactly large enough.
Follow-up to https://github.com/element-hq/synapse/pull/17672
This appears to be enough to make Element Web work (or at least move it
on to the next hurdle)
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Move filters tests to rest layer in order to test the new (with sliding
sync tables) and fallback paths that Sliding Sync can use.
Also found a bug in the new path because it's not being tested which is
also fixed in this PR. We now take into account `has_known_state` when
filtering.
Spawning from
https://github.com/element-hq/synapse/pull/17662#discussion_r1755574791.
This should have been done when we started using the new sliding sync
tables in https://github.com/element-hq/synapse/pull/17630
This PR changes `from pydantic import BaseModel` to `from
synapse._pydantic_compat import BaseModel` (as well as `constr`,
`conbytes`, `conint`, `confloat`).
It allows `check_pydantic_models.py` to mock those pydantic objects only
in the synapse module, and not interfere with pydantic objects in
external dependencies.
This should solve the CI problems for #17144, which breaks because
`check_pydantic_models.py` patches pydantic models from
[scim2-models](https://scim2-models.readthedocs.io/).
/cc @DMRobertson @gotmax23
fixes#17659
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
We need to bust the `get_sliding_sync_rooms_for_user`
cache when the room encryption is updated and any
other field that is used in the query.
Follow-up to https://github.com/element-hq/synapse/pull/17630
- Bust cache for membership change (cross-reference
`get_rooms_for_user`)
- Bust cache for room `encryption` (cross-reference
`get_room_encryption`)
- Bust cache for `forgotten` (cross-reference
`did_forget`/`get_forgotten_rooms_for_user`)
For rooms with a name we can skip fetching a full room summary, as we
don't need to calculate heroes, and instead just fetch the room counts
directly.
This also changes things to not return counts and heroes for non-joined
rooms. For left/banned rooms we were returning zero values anyway, and
for invite/knock rooms we don't really want to leak such information
(even if some of is included in the stripped state).
Speed up incremental sync by avoiding extra work. We first look at the
state delta changes and only fetch and calculate further derived things
if they have changed.
We ended up spending ~10% CPU creating a new dictionary and
`_RoomMembershipForUser`, so let's avoid creating new dicts and copying
by returning `newly_joined`, `newly_left` and `is_dm` as sets directly.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
I thought ruff check would also format, but it doesn't.
This runs ruff format in CI and dev scripts. The first commit is just a
run of `ruff format .` in the root directory.
This will help mitigating any discrepancies between the issuer
configured and the one returned by the OIDC provider.
This also removes the need for configuring the `account_management_url`
explicitely, as it will now be loaded from the OIDC discovery, as per
MSC2965.
Because we may now fetch stuff for the .well-known/matrix/client
endpoint, this also transforms the client well-known resource to be
asynchronous.
Fix outlier re-persisting causing problems with sliding sync tables
Follow-up to https://github.com/element-hq/synapse/pull/17512
When running on `matrix.org`, we discovered that a remote invite is
first persisted as an `outlier` and then re-persisted again where it is
de-outliered. The first the time, the `outlier` is persisted with one
`stream_ordering` but when persisted again and de-outliered, it is
assigned a different `stream_ordering` that won't end up being used.
Since we call `_calculate_sliding_sync_table_changes()` before
`_update_outliers_txn()` which fixes this discrepancy (always use the
`stream_ordering` from the first time it was persisted), we're working
with an unreliable `stream_ordering` value that will possibly be unused
and not make it into the `events` table.
This is so that we can cache it.
We also move the sliding sync types to
`synapse/types/handlers/sliding_sync.py`. This is mainly in-prep for
#17599 to avoid circular imports.
The only change in behaviour is that
`RoomSyncConfig.combine_sync_config(..)` now returns a new room sync
config rather than mutating in-place.
Reviewable commit-by-commit.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Pre-populate room data for quick filtering/sorting in the Sliding Sync
API
Spawning from
https://github.com/element-hq/synapse/pull/17450#discussion_r1697335578
This PR is acting as the Synapse version `N+1` step in the gradual
migration being tracked by
https://github.com/element-hq/synapse/issues/17623
Adding two new database tables:
- `sliding_sync_joined_rooms`: A table for storing room meta data that
the local server is still participating in. The info here can be shared
across all `Membership.JOIN`. Keyed on `(room_id)` and updated when the
relevant room current state changes or a new event is sent in the room.
- `sliding_sync_membership_snapshots`: A table for storing a snapshot of
room meta data at the time of the local user's membership. Keyed on
`(room_id, user_id)` and only updated when a user's membership in a room
changes.
Also adds background updates to populate these tables with all of the
existing data.
We want to have the guarantee that if a row exists in the sliding sync
tables, we are able to rely on it (accurate data). And if a row doesn't
exist, we use a fallback to get the same info until the background
updates fill in the rows or a new event comes in triggering it to be
fully inserted. This means we need a couple extra things in place until
we bump `SCHEMA_COMPAT_VERSION` and run the foreground update in the
`N+2` part of the gradual migration. For context on why we can't rely on
the tables without these things see [1].
1. On start-up, block until we clear out any rows for the rooms that
have had events since the max-`stream_ordering` of the
`sliding_sync_joined_rooms` table (compare to max-`stream_ordering` of
the `events` table). For `sliding_sync_membership_snapshots`, we can
compare to the max-`stream_ordering` of `local_current_membership`
- This accounts for when someone downgrades their Synapse version and
then upgrades it again. This will ensure that we don't have any
stale/out-of-date data in the
`sliding_sync_joined_rooms`/`sliding_sync_membership_snapshots` tables
since any new events sent in rooms would have also needed to be written
to the sliding sync tables. For example a new event needs to bump
`event_stream_ordering` in `sliding_sync_joined_rooms` table or some
state in the room changing (like the room name). Or another example of
someone's membership changing in a room affecting
`sliding_sync_membership_snapshots`.
1. Add another background update that will catch-up with any rows that
were just deleted from the sliding sync tables (based on the activity in
the `events`/`local_current_membership`). The rooms that need
recalculating are added to the
`sliding_sync_joined_rooms_to_recalculate` table.
1. Making sure rows are fully inserted. Instead of partially inserting,
we need to check if the row already exists and fully insert all data if
not.
All of this extra functionality can be removed once the
`SCHEMA_COMPAT_VERSION` is bumped with support for the new sliding sync
tables so people can no longer downgrade (the `N+2` part of the gradual
migration).
<details>
<summary><sup>[1]</sup></summary>
For `sliding_sync_joined_rooms`, since we partially insert rows as state
comes in, we can't rely on the existence of the row for a given
`room_id`. We can't even rely on looking at whether the background
update has finished. There could still be partial rows from when someone
reverted their Synapse version after the background update finished, had
some state changes (or new rooms), then upgraded again and more state
changes happen leaving a partial row.
For `sliding_sync_membership_snapshots`, we insert items as a whole
except for the `forgotten` column ~~so we can rely on rows existing and
just need to always use a fallback for the `forgotten` data. We can't
use the `forgotten` column in the table for the same reasons above about
`sliding_sync_joined_rooms`.~~ We could have an out-of-date membership
from when someone reverted their Synapse version. (same problems as
outlined for `sliding_sync_joined_rooms` above)
Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.dz5x6ef4mxz7)
</details>
### TODO
- [x] Update `stream_ordering`/`bump_stamp`
- [x] Handle remote invites
- [x] Handle state resets
- [x] Consider adding `sender` so we can filter `LEAVE` memberships and
distinguish from kicks.
- [x] We should add it to be able to tell leaves from kicks
- [x] Consider adding `tombstone` state to help address
https://github.com/element-hq/synapse/issues/17540
- [x] We should add it `tombstone_successor_room_id`
- [x] Consider adding `forgotten` status to avoid extra
lookup/table-join on `room_memberships`
- [x] We should add it
- [x] Background update to fill in values for all joined rooms and
non-join membership
- [x] Clean-up tables when room is deleted
- [ ] Make sure tables are useful to our use case
- First explored in
https://github.com/element-hq/synapse/compare/erikj/ss_use_new_tables
- Also explored in
76b5a576eb
- [x] Plan for how can we use this with a fallback
- See plan discussed above in main area of the issue description
- Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.dz5x6ef4mxz7)
- [x] Plan for how we can rely on this new table without a fallback
- Synapse version `N+1`: (this PR) Bump `SCHEMA_VERSION` to `87`. Add
new tables and background update to backfill all rows. Since this is a
new table, we don't have to add any `NOT VALID` constraints and validate
them when the background update completes. Read from new tables with a
fallback in cases where the rows aren't filled in yet.
- Synapse version `N+2`: Bump `SCHEMA_VERSION` to `88` and bump
`SCHEMA_COMPAT_VERSION` to `87` because we don't want people to
downgrade and miss writes while they are on an older version. Add a
foreground update to finish off the backfill so we can read from new
tables without the fallback. Application code can now rely on the new
tables being populated.
- Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.hh7shg4cxdhj)
### Dev notes
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.storage.test_events.SlidingSyncPrePopulatedTablesTestCase
SYNAPSE_POSTGRES=1 SYNAPSE_POSTGRES_USER=postgres SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.storage.test_events.SlidingSyncPrePopulatedTablesTestCase
```
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.handlers.test_sliding_sync.FilterRoomsTestCase
```
Reference:
- [Development docs on background updates and worked examples of gradual
migrations
](1dfa59b238/docs/development/database_schema.md (background-updates))
- A real example of a gradual migration:
https://github.com/matrix-org/synapse/pull/15649#discussion_r1213779514
- Adding `rooms.creator` field that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/10697
- Adding `rooms.room_version` that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/6729
- Adding `room_stats_state.room_type` that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/13031
- Tables from MSC2716: `insertion_events`, `insertion_event_edges`,
`insertion_event_extremities`, `batch_events`
- `current_state_events` updated in
`synapse/storage/databases/main/events.py`
---
```
persist_event (adds to queue)
_persist_event_batch
_persist_events_and_state_updates (assigns `stream_ordering` to events)
_persist_events_txn
_store_event_txn
_update_metadata_tables_txn
_store_room_members_txn
_update_current_state_txn
```
---
> Concatenated Indexes [...] (also known as multi-column, composite or
combined index)
>
> [...] key consists of multiple columns.
>
> We can take advantage of the fact that the first index column is
always usable for searching
>
> *--
https://use-the-index-luke.com/sql/where-clause/the-equals-operator/concatenated-keys*
---
Dealing with `portdb` (`synapse/_scripts/synapse_port_db.py`),
https://github.com/element-hq/synapse/pull/17512#discussion_r1725998219
---
<details>
<summary>SQL queries:</summary>
Both of these are equivalent and work in SQLite and Postgres
Options 1:
```sql
WITH data_table (room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)}) AS (
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
)
INSERT INTO sliding_sync_non_join_memberships
(room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)})
SELECT * FROM data_table
WHERE membership != ?
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
Option 2:
```sql
INSERT INTO sliding_sync_non_join_memberships
(room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)})
SELECT
column1 as room_id,
column2 as user_id,
column3 as membership_event_id,
column4 as membership,
column5 as event_stream_ordering,
{", ".join("column" + str(i) for i in range(6, 6 + len(insert_keys)))}
FROM (
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
) as v
WHERE membership != ?
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
If we don't need the `membership` condition, we could use:
```sql
INSERT INTO sliding_sync_non_join_memberships
(room_id, membership_event_id, user_id, membership, event_stream_ordering, {", ".join(insert_keys)})
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
</details>
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
When returning receipts in sliding sync for initial rooms we should
always include our own receipts in the room (even if they don't match
any timeline events).
Reviewable commit-by-commit.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Move calculating of the room lists out of the core handler. This should
make it easier to switch things around to start using the tables in
#17512.
This is just moving code between files and methods.
Reviewable commit-by-commit
This supersedes #17503, given the per-connection state is being heavily
rewritten it felt easier to recreate the PR on top of that work.
This correctly handles the case of timeline limits going up and down.
This does not handle changes in `required_state`, but that can be done
as a separate PR.
Based on #17575.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Previously, we just had very basic partial room exclusion based on
whether we were lazy-loading room members. Now with this PR, we added
`must_await_full_state(...)` with rules to check if we have a we're only
requesting `required_state` which is completely satisfied even with
partial state.
Partially-stated rooms should have all state events except for remote
membership events so if we require a remote membership event anywhere,
then we need to return `True`.
This triggers the client to start a new sliding sync connection. If we
don't do this and the client asks for the full range of rooms, we end up
sending down all rooms and their state from scratch (which can be very
slow)
This causes things like
https://github.com/element-hq/element-x-ios/issues/3115 after we restart
the server
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Update `filters.is_encrypted` and `filters.types`/`filters.not_types` to
be robust when dealing with remote invite rooms in Sliding Sync.
Part of
[MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575):
Sliding Sync
Follow-up to https://github.com/element-hq/synapse/pull/17434
We now take into account current state, fallback to stripped state
for invite/knock rooms, then historical state. If we can't determine
the info needed to filter a room (either from state or stripped state),
it is filtered out.
Rather than always including all rooms in range.
Also adds a pre-filter to rooms that checks the stream change cache to
see if anything might have happened.
Based on #17447
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
The basic idea is that we introduce a new token for a sliding sync
connection, which stores the mapping of room to room "status" (i.e. have
we sent the room down?). This token allows us to handle duplicate
requests properly. In future it can be used to store more
"per-connection" information safely.
In future this should be migrated into the DB, so its important that we
try to reduce the number of syncs where we need to update the
per-connection information. In this PoC this only happens when we: a)
send down a set of room for the first time, or b) we have previously
sent down a room and there are updates but we are not sending the room
down the sync (due to not falling in a list range)
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Backfill events have a negative stream ordering, and so its not useful
to use to compare with other (positive) stream orderings.
Plus, the Rust SDK currently assumes `bump_stamp` is positive.
As it gets used in sliding sync.
We basically invalidate it in all the same places as
`get_rooms_for_user`. Most of the changes are due to needing the
arguments you pass in to be hashable (which lists aren't)
Prior to this PR, remote downloads which did not provide a
`content-length` were decremented from the remote download ratelimiter
at the max allowable size, leading to excessive ratelimiting - see
https://github.com/element-hq/synapse/issues/17394.
This PR adds a linearizer to limit concurrent remote downloads to 6 per
IP address, and decrements remote downloads without a `content-length`
from the ratelimiter *after* the download is complete and the response
length is known.
Also adds logic to ensure that responses with a known length respect the
`max_download_size`.
Add room subscriptions to Sliding Sync `/sync`
Based on
[MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575):
Sliding Sync
Currently, you can only subscribe to rooms you have had *any* membership
in before.
In the future, we will allow `world_readable` rooms to be subscribed to
without joining.
We can only fetch room types for rooms the server is in, so we need to
only filter rooms that we're joined to.
Also includes a perf fix to bulk fetch room types.
We don't necessarily have `instance_name` for old events (before we
support multiple event persisters). We treat those as if the
`instance_name` was "master".
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
`bump_stamp` corresponds to the `stream_ordering` of the latest `DEFAULT_BUMP_EVENT_TYPES` in the room. This helps clients sort more readily without them needing to pull in a bunch of the timeline to determine the last activity. `bump_event_types` is a thing because for example, we don't want display name changes to mark the room as unread and bump it to the top. For encrypted rooms, we just have to consider any activity as a bump because we can't see the content and the client has to figure it out for themselves.
Outside of Synapse, `bump_stamp` is just a free-form counter so other implementations could use `received_ts`or `origin_server_ts` (see the [*Security considerations* section in MSC3575 about the potential pitfalls of using `origin_server_ts`](https://github.com/matrix-org/matrix-spec-proposals/blob/kegan/sync-v3/proposals/3575-sync.md#security-considerations)). It doesn't have any guarantee about always going up. In the Synapse case, it could go down if an event was redacted/removed (or purged in cases of retention policies).
In the future, we could add `bump_event_types` as [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575) mentions if people need to customize the event types.
---
In the Sliding Sync proxy, a similar [`timestamp` field was added](https://github.com/matrix-org/sliding-sync/pull/247) for the same purpose but the name is not obvious what it pertains to or what it's for.
The `timestamp` field was also added to Ruma in https://github.com/ruma/ruma/pull/1622
Follows on from @H-Shay's great work at
https://github.com/matrix-org/synapse/pull/15344 and MSC4026.
Also enables its use for MSC3881, mainly as an easy but concrete example
of how to use it.
This can help ensure that the rooms are eventually purged if the other
local users also forget them. Synapse already clears some of the room
information as part of the `_background_remove_left_rooms` background
task, but this doesn't catch `events`, `event_json`, etc.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
This is #17291 (which got reverted), with some added fixups, and change
so that tests actually pick up the error.
The problem was that we were not calculating any new chain IDs due to a
missing `not` in a condition.
Reduce the replication traffic of device lists, by not sending every
destination that needs to be sent the device list update over
replication. Instead a "hosts to send to have been calculated"
notification over replication, and then federation senders read the
destinations from the DB.
For non federation senders this should heavily reduce the impact of a
user in many large rooms changing a device.
This reverts commit bdf82efea5 (#17291)
This seems to have stopped persisting auth chains for new events, and so
is causing state res to fall back to the slow methods
We calculate the auth chain links outside of the main persist event
transaction to ensure that we do not block other event sending during
the calculation.
Sort is no longer configurable and we always sort rooms by the `stream_ordering` of the last event in the room or the point where the user can see up to in cases of leave/ban/invite/knock.
Add `event.internal_metadata.instance_name` (the worker instance that persisted the event) to go alongside the existing `event.internal_metadata.stream_ordering`.
`instance_name` is useful to properly compare and query for events with a token since you need to compare both the `stream_ordering` and `instance_name` against the vector clock/`instance_map` in the `RoomStreamToken`.
This is pre-requisite work and may be used in https://github.com/element-hq/synapse/pull/17293
Adding `event.internal_metadata.instance_name` was first mentioned in the initial Sliding Sync PR while pairing with @erikjohnston, see 09609cb0db (diff-5cd773fb307aa754bd3948871ba118b1ef0303f4d72d42a2d21e38242bf4e096R405-R410)
PR where this was introduced: https://github.com/matrix-org/synapse/pull/14817
### What does this affect?
`get_last_event_in_room_before_stream_ordering(...)` is used in Sync v2 in a lot of different state calculations.
`get_last_event_in_room_before_stream_ordering(...)` is also used in `/rooms/{roomId}/members`
https://github.com/matrix-org/matrix-spec-proposals/pull/4151
This is intended to be enabled by default for immediate use. When FCP is
complete, the unstable endpoint will be dropped and stable endpoint
supported instead - no backwards compatibility is expected for the
unstable endpoint.
Spawning from https://github.com/element-hq/synapse/pull/17187#discussion_r1619492779 around wanting to put `SlidingSyncBody` (parse the request in the rest layer), `SlidingSyncConfig` (from the rest layer, pass to the handler), `SlidingSyncResponse` (pass the response from the handler back to the rest layer to respond) somewhere that doesn't contaminate the imports and cause circular import issues.
- Moved Pydantic parsing models to `synapse/types/rest`
- Moved handler types to `synapse/types/handlers`
Based on [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575): Sliding Sync
This iteration only focuses on returning the list of room IDs in the sliding window API (without sorting/filtering).
Rooms appear in the Sliding sync response based on:
- `invite`, `join`, `knock`, `ban` membership events
- Kicks (`leave` membership events where `sender` is different from the `user_id`/`state_key`)
- `newly_left` (rooms that were left during the given token range, > `from_token` and <= `to_token`)
- In order for bans/kicks to not show up, you need to `/forget` those rooms. This doesn't modify the event itself though and only adds the `forgotten` flag to `room_memberships` in Synapse. There isn't a way to tell when a room was forgotten at the moment so we can't factor it into the from/to range.
### Example request
`POST http://localhost:8008/_matrix/client/unstable/org.matrix.msc3575/sync`
```json
{
"lists": {
"foo-list": {
"ranges": [ [0, 99] ],
"sort": [ "by_notification_level", "by_recency", "by_name" ],
"required_state": [
["m.room.join_rules", ""],
["m.room.history_visibility", ""],
["m.space.child", "*"]
],
"timeline_limit": 100
}
}
}
```
Response:
```json
{
"next_pos": "s58_224_0_13_10_1_1_16_0_1",
"lists": {
"foo-list": {
"count": 1,
"ops": [
{
"op": "SYNC",
"range": [0, 99],
"room_ids": [
"!MmgikIyFzsuvtnbvVG:my.synapse.linux.server"
]
}
]
}
},
"rooms": {},
"extensions": {}
}
```
Use fully-qualified `PersistedEventPosition` (`instance_name` and `stream_ordering`) when returning `RoomsForUser` to facilitate proper comparisons and `RoomStreamToken` generation.
Spawning from https://github.com/element-hq/synapse/pull/17187 where we want to utilize this change
We try and deduplicate in two places: 1) really early on, and 2) just
before we persist the event. The first case was broken due to it
occuring before the profile information was added, and so it thought the
event contents were different.
The second case did catch it and handle it correctly, however doing so
creates a redundant state group leading to bloat.
Fixes#3791
There is a problem with `StreamIdGenerator` where it can go backwards
over restarts when a stream ID is requested but then not inserted into
the DB. This is problematic if we want to land #17215, and is generally
a potential cause for all sorts of nastiness.
Instead of trying to fix `StreamIdGenerator`, we may as well move to
`MultiWriterIdGenerator` that does not suffer from this problem (the
latest positions are stored in `stream_positions` table). This involves
adding SQLite support to the class.
This only changes id generators that were already using
`MultiWriterIdGenerator` under postgres, a separate PR will move the
rest of the uses of `StreamIdGenerator` over.
When a module rejects a piece of media we end up trying to close the
same logging context twice.
Instead of fixing the existing code we refactor to use an async context
manager, which is easier to write correctly.
This PR ports the logic from the
[synapse_auto_accept_invite](https://github.com/matrix-org/synapse-auto-accept-invite)
module into synapse.
I went with the naive approach of injecting the "module" next to where
third party modules are currently loaded. If there is a better/preferred
way to handle this, I'm all ears. It wasn't obvious to me if there was a
better location to add this logic that would cleanly apply to all
incoming invite events.
Relies on https://github.com/element-hq/synapse/pull/17166 to fix linter
errors.
Removed `request_key` from the `SyncConfig` (moved outside as its own function parameter) so it doesn't have to flow into `_generate_sync_entry_for_xxx` methods. This way we can separate the concerns of caching from generating the response and reuse the `_generate_sync_entry_for_xxx` functions as we see fit. Plus caching doesn't really have anything to do with the config of sync.
Split from https://github.com/element-hq/synapse/pull/17167
Spawning from https://github.com/element-hq/synapse/pull/17167#discussion_r1601497279
This is to allow clients to query the configured federation whitelist.
Disabled by default.
---------
Co-authored-by: Devon Hudson <devonhudson@librem.one>
Co-authored-by: devonh <devon.dmytro@gmail.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
When there have been lots of changes compared with the number of
entities, we can do a fast(er) path.
Locally I ran some benchmarking, and the comparison seems to give the
best determination of which method we use.
This change will apply the `email` & `picture` provided by OIDC to the
new user account when registering a new user via OIDC. If the user is
directed to the account details form, this change makes sure they have
been selected before applying them, otherwise they are omitted. In
particular, this change ensures the values are carried through when
Synapse has consent configured, and the redirect to the consent form/s
are followed.
I have tested everything manually. Including:
- with/without consent configured
- allowing/not allowing the use of email/avatar (via
`sso_auth_account_details.html`)
- with/without automatic account detail population (by un/commenting the
`localpart_template` option in synapse config).
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
... when workers are unreachable, etc.
Fixes https://github.com/element-hq/synapse/issues/17117.
The general principle is just to make sure that we propagate any
exceptions to the JsonResource, so that we return an error code to the
sending server. That means that the sending server no longer considers
the message safely sent, so it will retry later.
In the issue, Erik mentions that an alternative solution would be to
persist the to-device messages into a table so that they can be retried.
This might be an improvement for performance, but even if we did that,
we still need this mechanism, since we might be unable to reach the
database. So, if we want to do that, it can be a later follow-up.
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
Weakness in auth chain indexing allows DoS from remote room members
through disk fill and high CPU usage.
A remote Matrix user with malicious intent, sharing a room with Synapse
instances before 1.104.1, can dispatch specially crafted events to
exploit a weakness in how the auth chain cover index is calculated. This
can induce high CPU consumption and accumulate excessive data in the
database of such instances, resulting in a denial of service.
Servers in private federations, or those that do not federate, are not
affected.
This PR fixes a very, very niche edge-case, but I've got some more work
coming which will otherwise make the problem worse.
The bug happens when the syncing user leaves a room, and has a sync
filter which includes "left" rooms, but sets the timeline limit to 0. In
that case, the state returned in the `state` section is calculated
incorrectly.
The fix is to pass a token corresponding to the point that the user
leaves the room through to `compute_state_delta`.
When running unit tests, we patch the database connection pool so that
it runs queries "synchronously". This is ok, except that if any queries
are launched before we do the patching, those queries get left in limbo
and never complete.
To fix this, let's change the way we do the switcheroo, by patching out
the method which creates the connection pool in the first place.
When a lot of locks are waiting for a single lock, notifying all locks
independently with `call_later` on each release is really costly and
incurs some kind of async contention, where the CPU is spinning a lot
for not much.
The included test is taking around 30s before the change, and 0.5s
after.
It was found following failing tests with
https://github.com/element-hq/synapse/pull/16827.
We do this by adding support to the LRU cache for "extra indices" based
on the cached value. This allows us to efficiently map from room ID to
the cached events and only invalidate those.
During the migration the automated script to update the copyright
headers accidentally got rid of some of the existing copyright lines.
Reinstate them.
Prior to this PR, if a request to create a public (public as in
published to the rooms directory) room violated the room list
publication rules set in the
[config](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#room_list_publication_rules),
the request to create the room was denied and the room was not created.
This PR changes the behavior such that when a request to create a room
published to the directory violates room list publication rules, the
room is still created but the room is not published to the directory.
The idea here being that the directory server shouldn't advertise rooms
to a requesting server is the requesting server would not be allowed to
join or participate in the room.
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `develop` <!-- git-stack-base-branch:develop -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Pass `from_federation_origin` down into room list retrieval code
</li>
<li>
Don't cache /publicRooms response for inbound federated requests
</li>
<li>
fixup! Don't cache /publicRooms response for inbound federated requests
</li>
<li>
Cap the number of /publicRooms entries to 100
</li>
<li>
Simplify code now that you can't request unlimited rooms
</li>
<li>
Filter out rooms from federated requests that don't have the correct ACL
</li>
<li>
Request a handful more when filtering ACLs so that we can try to avoid
shortchanging the requester
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
There are a couple of things we need to be careful of here:
1. The current python code does no validation when loading from the DB,
so we need to be careful to ignore such errors (at least on jki.re there
are some old events with internal metadata fields of the wrong type).
2. We want to be memory efficient, as we often have many hundreds of
thousands of events in the cache at a time.
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
Previously, the response status of `HTMLResource` was hardcoded as
`200`. However, for proper redirection after the user verifies their
email, we require the status to be `302`. This PR addresses that issue
by using `code` as response status.
Closes:
- https://github.com/matrix-org/synapse/issues/10397
- #10397
An administrator should know whether he wants to set a password or not.
There are many uses cases where a blank password is required.
- Use of only some users with SSO.
- Use of bots with password, users with SSO
This reverts two commits:
0bb8e418a4
"Fix postgres schema after dropping old tables (#16730)"
and
51e4e35653
"Add a Postgres `REPLICA IDENTITY` to tables that do not have an implicit one. This should allow use of Postgres logical replication. (take 2, now with no added deadlocks!) (#16658)"
and also amends the changelog.
* Add `ALTER TABLE ... REPLICA IDENTITY ...` for individual tables
We can't combine them into one file as it makes it likely to hit a deadlock
if Synapse is running, as it only takes one other transaction to access two
tables in a different order to the schema delta.
* Add notes
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Re-introduce REPLICA IDENTITY test
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Implement MSC3860 to follow redirects for federated media downloads.
Note that the Client-Server API doesn't support this (yet) since the media
repository in Synapse doesn't have a way of supporting redirects.
* Describe `insert_client_ip`
* Pull out client_ips and MAU tracking to BaseAuth
* Define HAS_AUTHLIB once in tests
sick of copypasting
* Track ips and token usage when delegating auth
* Test that we track MAU and user_ips
* Don't track `__oidc_admin`
If a worker reconnects to Redis we send out the current positions of all our streams. However, if we're also trying to send out a backlog of RDATA at the same time then we can end up sending a `POSITION` with the current token *before* we've sent all the RDATA before the current token.
This doesn't cause actual bugs as the receiving servers see the POSITION, fetch the relevant rows from the DB, and then ignore the old RDATA as they come in. However, this is inefficient so it'd be better if we didn't send out-of-order positions
* Fix the CI query that did not detect all cases of missing primary keys
* Add more missing REPLICA IDENTITY entries
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add Postgres replica identities to tables that don't have an implicit one
Fixes#16224
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Move the delta to version 83 as we missed the boat for 82
* Add a test that all tables have a REPLICA IDENTITY
* Extend the test to include when indices are deleted
* isort
* black
* Fully qualify `oid` as it is a 'hidden attribute' in Postgres 11
* Update tests/storage/test_database.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Add missed tables
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
If simple_{insert,upsert,update}_many_txn is called without any data
to modify then return instead of executing the query.
This matches the behavior of simple_{select,delete}_many_txn.
