Following configuration options deleted:
- `--secret-ts-exp-time`
- `--prod` - disables SOFTWARE_ATTRIBUTE in messages. Now it is default.
To enable SOFTWARE_ATTRIBUTE use `--software-attribute`
- `--no-sslv2`, `--no-sslv3` - old versions of SSL are not supported and
it is not possible to enable them
These are breaking changes - if the CLI command has any of those
arguments it will cause turnserver to terminate and notify about unknown
argument
As part of looking at #1588 , I figured that sending `SOFTWARE`
attribute is also part of a problem as it increases messages sent out by
coturn and thus increasing amplification factor. For 4.6.2, the
additional size is 24 bytes (4 bytes attribute header, and 20 bytes for
"Coturn-4.6.2 'Gorst'")
If we are to use an example from #1588, "A 62 byte request will be met
with Coturn’s 401 Unauthorized response which is 150 bytes, a factor of
~2.42." - without SOFTWARE the response will be 126 bytes which reduces
amplification factor to ~2.
As I observed with multiple providers using coturn - some of the are
sending it. Meaning, they do not set `--no-software-attribute` - most
probably due to lack of clarity about this setting.
I believe sending SOFTWARE_ATTRIBUTE should be off by default which is
hinted in the RFC
(https://datatracker.ietf.org/doc/html/rfc8489#section-16.1.2)
Detailed changes:
- Extract setting the attribute into a function to avoid code
duplication
- This option is now not reloadable
- The option is now called `software_attribute` because inverse logic
creates multiple double-not in the code which makes it harder to read.
- `no-software_attribute` is still functional but marked as deprecated
in documentation
Test Plan:
- Run local tests with different cli arguments (new and deprecated) and
confirm SOFTWARE attribute is off by default, and added when arguments
say so
Some actions do not build with prometheus - adding prometheus tests
fails the jobs
cmake build tests did not run due to different target folder (while
reporting success) - now the bin folder is detected
Implement a custom prometheus http handler in order to:
1. Support listening on a specified address as opposed to any
2. Remove the requirement on the unmaintained promhttp library
This feature comes with one limitation: if an IPv4 address is used, the
server will not listen on the IPv6-mapped address, even if IPv6 is
available. That is, dual-stacking does not work.
Solves: #1475
---------
Co-authored-by: Pavel Punsky <eakraly@users.noreply.github.com>
Add ability to authenticate to redis with a password (and optionally username for redis 6.0)
Tested by building and using with redis on old and new versionss
I believe that many users, like myself, prefer to reference the
`turn.conf` file when deploying the TURN server with Docker, rather than
the `Readme.turnserver`. Additionally, I think it's important to
synchronize the Prometheus settings from the README into the` turn.conf`
file for better clarity. This way, users won't overlook any essential
options.
Co-authored-by: Ben Chang <ben_chang@htc.com>
In preparation to deprecation of openssl below version 1.1.1 switch to
using openssl-1.1.1 on amazonlinux:2 (where 1.0.2 is the default)
Fixes build issue for #1397
Add new Drain feature
-when coturn server is in drain mode
-current allocations will continue to work as usual
-new allocations will be rejected with a 403 (Forbidden) response
-when all allocations go away, then coturn will shutdown
-Enable drain mode with either
-signaling SIGUSR1
-turn_admin_server "drain" CLI command
This contribution is from Wire. https://wire.com/
You can see the list here:
https://github.com/coturn/coturn/security/code-scanning
In this case, i'm attempting to address:
ns_turn_allocation.c:725 -- Dereferencing NULL pointer. 'ub->bufs'
contains the same NULL value as 'realloc()' did.
ns_turn_allocation.c:724 -- 'realloc' might return null pointer:
assigning null pointer to 'ub->bufs', which is passed as an argument to
'realloc', will cause the original memory block to be leaked.
ns_turn_allocation.c:604 -- Dereferencing NULL pointer. 'a->tcs.elems'
contains the same NULL value as 'realloc()' did.
ns_turn_allocation.c:582 -- Dereferencing NULL pointer 'tc'.
ns_turn_allocation.c:603 -- 'realloc' might return null pointer:
assigning null pointer to 'a->tcs.elems', which is passed as an argument
to 'realloc', will cause the original memory block to be leaked.
ns_turn_allocation.c:525 -- Using uninitialized memory '*chi'.
ns_turn_allocation.c:229 -- Using uninitialized memory '*slot'.
---------
Co-authored-by: Pavel Punsky <eakraly@users.noreply.github.com>
to commit
5f5ecee776
Which is the lastest commit in the "develop" branch.
This seems to fix a couple of places where non-0 is mistakenly returned
as "success" -- why projects don't use bool for these return types is
beyond my understanding.
This problem is caused by this issue:
https://github.com/actions/checkout/issues/1809
Several comments include documentation on various environment variables
to force it to use the older nodejs release still, but probably those
various workarounds will stop working eventually.
Previously if the system had an interface with a static IP configured,
coturn would attempt to bind to that address, even if the interface was
down. This would fail, and prevent coturn from starting (even if there
were other usable interfaces)
Fixes#1533 and #1534
Memsetting `turn_params.default_users_db` before reading conf file, not
after.
Because auth is read in first iteration so secret was wiped out.
# test plan
Add new test script that uses config file to setup turnserver instead of
cli arguments and confirm it works (fails without the change)
The point of this change is to make the build instructions a bit more
straight forward. Since the hiresevent2 source files are only ever used
by the relay target, this scoping makes sense in general.
Use the include-what-you-use program to (partially) clean up header
includes, so that only includes which are needed, and no includes that
are not needed (or at least closer to that ideal) are done.
For a c-language project, the build-time improvements from this change
is minimal. This would have a much bigger impact on a C++ project than a
C-project for build times.
So for coturn, this change is mostly intended to just provide
consistency and make it easier to locate weird issues like strange
dependencies, and unnecessary connections between code.
